Product Details

Boy’s casual pullover jacket is a fashion style with contrast color black and white, which looks simple but unique, especially by use print with Chinese characters make this casual pullover jacket the most popular one. Whole body fabric with PU coating to make it water repellent.

For this pullover jacket, there is nylon zipper at upper part of center front, with logo on zipper puller, words in color white. Above the zipper is 2 layer black fabric panel, with cut on neck protection, inside with 60gsm padding, and on top layer of fabric, with contrast white color. Panel closed to body with 2pcs velcro tape.

The hood fixed to body at neck line, 3 parts hood in color black, lining also in black 210T taffeta, fixed with small stripe at seam middle of the hood. Hood panel is 10cm in width. Inside of the hood, there is 60gsm padding, between the padding and lining, there is interfacing to prevent the padding fibre come through.

Front yoke also with black fabric color, and below the yoke there is black fabric panel only fixed to body at top side with single stitching. Armhole with double stitching 0.1/0.6cm.

Lower part of this casual pullover jacket with kangaroo pocket, and under the upper part of the pocket, there is contrast color black print, pocket entry at sides, turned over with cut on body fabric facing, finished width 2.6cm, inside of it is 210T taffeta lining.

Sleeves in solid color black, and on left sleeve, there is contrast color white print, sleeve hem with elastic tape inside to adjust and top stitched.

On left seam, there is reversed zipper, length 16cm, opened at body hem.

Body hem turned inside and top stitched, with drawstring inside the hem tunnel, comes out from the eyelets beside right seam, and for out-coming part, adjust by stopper and woven tape at side seam.

Casual pullover jacket with 210T taffeta lining, quilted with interfacing and padding.

Lining at body and sleeve hem has 1cm space fold at edge, generally a little more wide than body, which will make you comfortable to wear this casual pullover jacket.

Backside of this casual jacket is simple, upper part is black, lower part is contrast color white and with print 5cm above the hem.

Detailed information of Casual Pullover jacket:

1, Fabric 1, 228 T Taslon, 70x160, lack 100% polyester, PU transparent coating inside, so it with water repellent, for hood outside、front yoke、back yoke、sleeves、C.F. panel、hangerloop、pleat below front yoke、hood facing、facing below C.F. zipper、zipper underlap panel、badge below size label.

2, Fabric 2, 228T Taslon, 70x160, 100% polyester, light color white, so with PU milky coating inside, and the fabric is water repellent, for lower body part front and back and kangaroo pocket.

3, Lining 1, 210T taffeta, 100% polyester, for body upper part, for sleeve, for hood.

4, Lining 2, 210T taffeta, 100% polyester, for lower body part and pocket inside.

5, Interfacing 1, woven one, between lining and padding to avoid padding come through

6, Interfacing 2, soft non woven interfacing, at flap/panel at front part below yoke

7, Padding 1, 100%PES 120gsm, height 1.5cm, for sleeve、hood and body.

8, Padding 2, 100%PES 60gsm, height 0.5cm, for zipper underlap panel、C.F. panel and kangaroo pocket.

9, Print 1, apprpx 3cm x 19cm, at C.F. panel, panel is black, print is white

10, Print 2, height 6cm, length 30cm, for under cangaroo pocket, pkt is white, print is black.

11, Print 3, approx 7cm x 52cm for sizes 158-176, approx 6cm x 45cm for sizes 134-152, for left sleeve, sleeve is black, print is white

12, Print 4, approx 18cm x 5cm for sizes 158-176,approx 15cm x 4cm for sizes 134-152,7cm above body hem, backside, fabric is white, print is black

13, 5#nylon zipper, metal logo zipper puller, 2.6cm x 1.2cm, at C.F, for sideseam one is reversed.

14, Elastic Drawstring, 0.3cm, inside body hem.

15, Stopper, plastic drawstring stopper, 2 hole flat, 2cm x 1.8cm x0.7cm

16, 100%PES Woven tape, 0.7cm,at body hem inside for stopper affixation, above body hem for drawstring affixation.

17, Metal Eyelets, inside 0.7cm,outside 1.1cm, 2xfor drawstring outcome inside hem at right side.

18, Elastic tape, 2cm, at sleeve cuff.

19, Velcro tape, 100%PES, 2x for C.F. panel closure,size 5.5cm x 1.5cm;1xat tape hem inside for drawstring affixation,size 1.5cm x 1.5cm.

20, Woven size label, this is a print on bodyfabric, inside center back below neck.

21, Care label +Bionic hang tag+ hang tag +price tag+ size sticker.

Measurements of the Casual Pullover jacket:（cm）

Below is the measurement chart of the Casual Pullover jacket: 

Other information :

Sample: We can also make samples according to if you need it. And normally our proto can be FREE. the sample is sent out within 5-7 days;

Packing: each piece with a poly bag, packed in carton;

Production time: 30 to 45 days after all materials approval, based on different qty;

Trade term: EXW, FOB, CIF, LDP, other trade term are also negotiable ;

Payment : T/T, L/C,D/P ,other payment methods are also negotiable ;

Shipment: ocean shipping, train shipping, and air shipping ;

We are located in the middle of China with a large population and a good price.
We had made products for TAKKO, C&A, GUESS, FILA, etc.
We have convenient vessel shipment and also train shipment directly from our city to Germany.
Hope we can have a chance to help you to win business!

http://www.cciola-jacket.com/